49 900$ CAD / 36 251$ USD
Kello-Bilt 325 - 10' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: 3/8 32" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support and long life on t
128 200$ CAD / 93 135$ USD
Features of Kello-Bilt Tandem Disc Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricated as a single piece of steel for maximum stability. There are no U-Bolts to become stretched and loosened that can cause disc assemblies or bearing failure. Heavy Duty Construction: Assembly is done with Grade 8 Zinc-Plated bolts and hardware, and constructed with 6” by 4” by 3/8” thick high strength steel tube. Frames are fully welded and reinforced to withstand acres of rough use. Crafted In Canada: Manufactured in Red Deer County, Alberta.
133 500$ CAD / 96 985$ USD
Kello-Bilt 225DOW - 38' Tandem Disc (Ask about other models Kello-Bilt available) *Pre-Selling This model features a four section design for maximum flexibility and weight distribution, with folding wings with narrow width for ease of transportation. Take care of crop residue, and hard dry soil with ease. Features of Kello-Bilt Tandem Disc: Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricated as a single piece of steel for maximum stability. There are no U-Bolts to become stretched and loosened that can cause disc assemblies or bearing failure. Heavy Duty Construction: Assembly is done with Gra
99 000$ CAD / 71 922$ USD
Kello Bilt 225TSW-23' Tandem Disc *Pre-Selling Looking for a versatile disc harrow to handle light to medium soil tilling? Look no further than the Kello-Bilt Tandem Disc available from Flaman Agriculture. This heavy-duty disc harrow is designed for the efficient cultivation of light and medium soil with crop residue. The three-section folding wing design allows for narrow transport on roads, along with even weight distribution while tilling your fields. Take care of crop residue and hard, dry soil with ease. Features of Kello-Bilt Tandem Disc Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricat
39 600$ CAD / 28 769$ USD
Kello-Bilt 225 - 14' Offset Breaking Disc *Pre-Selling Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 26" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support a
42 700$ CAD / 31 021$ USD
Kello-Bilt 275 - 12' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 26" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support and long life
55 300$ CAD / 40 174$ USD
Kello-Bilt 275 - 16' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 28" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support and long life
41 500$ CAD / 30 149$ USD
Kello-Bilt 225 - 16' Offset Breaking Disc *Pre-Selling Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: Standard 26" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support a
