49 900$ CAD / 36 251$ USD
Kello-Bilt 325 - 10' Offset Breaking Disc Looking for an easy-to-use and heavy-duty disc harrow? Look no further than the Kello-Bilt Offset Disc from Flaman Agriculture. The Kello-Bilt Offset Disc is perfect for small horsepower tractors and can easily knock down heavy straw and crop residue. The smaller design allows for easier travel and storage while doing the same work as larger tandem discs. (*Note: Choose from available models with help from your local Flaman Ag Expert). Features of Kello-Bilt Offset Discs: Oil Bath Bearing: Features back-to-back tapered roller bearings in 90W Gear Oil bath and sealed with Duo-Cone TM Seals. Welded Spacer Spool: Fabricated steel spacer spools that won’t shatter or compress, provide maximum durability in the toughest conditions. Disc Blades: 3/8 32" notched disc blades on the front and rear make quick work out of the tough ground. Gang Shafts & End Washers: Made of high carbon steel and designed to eliminate stretch or premature failure. Kello-Bilt's simple locking washer system makes sure both ends of the gang shaft are tight to reduce downtime in the field. Bearing Standards & Wear Plates: Build from 3/8" thickness rectangular tubing for greater support and long life on t
128 200$ CAD / 93 135$ USD
Features of Kello-Bilt Tandem Disc Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricated as a single piece of steel for maximum stability. There are no U-Bolts to become stretched and loosened that can cause disc assemblies or bearing failure. Heavy Duty Construction: Assembly is done with Grade 8 Zinc-Plated bolts and hardware, and constructed with 6” by 4” by 3/8” thick high strength steel tube. Frames are fully welded and reinforced to withstand acres of rough use. Crafted In Canada: Manufactured in Red Deer County, Alberta.
5 500$ CAD / 3 996$ USD
2024 Farm King 6.5' 3pt Disc FARM KINGS DISCS ARE HEAVILY CONSTRUCTED TO PROVIDE LONG LASTING EQUIPMENT FOR MULTIPLE APPLICATIONS. Specializing in seedbed preparation, the Farm King disc penetrates the crusty, hard packed soil and rejuvenates it for easy seed application. Hardened steel discs help churn the soil to reveal a nutrient rich layer and deeper rich soil texture. Notched and smooth blades are available in any combination. Each Farm King disc is Quick hitch compatible. Model Specs Width - 6.5' Discs - 20 Disc Diameter - 18" HP Requirements - 25hp - 50hp Weight - 732 lbsDelivery options are available, ask your salesperson for details.Finance and lease options available OAC.Prices are subject to applicable taxes.
Contactez le concessionnaire pour le prix
Versatile SD650 Offset Disk: 16ft width, 12" spacing, 28" x 3/8" notched blades front and rear. Features bearing wear plates, trash guards for durability. Hydraulic leveling and depth control ensure precise adjustments for optimal soil tillage. A reliable tool for efficient land preparation in diverse agricultural settings.
156 500$ CAD / 113 694$ USD
The DHX’s two rows of 18” eight wave coulters on 8” spacing followed by five bars of 5/8” x 26” heavy harrow tines allows it to efficiently chop straw, mix residue with the ground all while spreading and levelling. 5 Rows of 5/8 x 26” Harrows with High Wear Tips,New Individual Torflex Mount on Disc Blades There is a single point depth control for the discs mounted at the rear of the machine. Simply move the adjustment along the slide to set your disc depth. The main frame of the DHX is made from 12” x 12” 3/8” thick tubing The wing frames have been designed to carry almost an additional 3,000 lbs of water which adds an extra 30 lbs force to each disk for increased penetration if needed. Delivery options are available, ask your salesperson for details.Finance and lease options available OAC.Prices are subject to applicable taxes.
123 400$ CAD
Please Call for Machine Availability & Location; 36'; 24" x 1/4" blades; 8-3/4" spacing; "C" flex carriers; (4) 380/55R16.5 & (4) 12.5Lx15 tires; hyd leveling hitch; cat IV single lip hitch; 22740 lbs.
223 000$ CAD / 162 005$ USD
All New 2024 Pottinger Terradisc 10001T - High Speed Disk 32'10" Working width - 80 Discs 1'11" Disc diameter at 0.5" Spacing, Gang spacing 2'11", Minimum 375hp, Transport width 9'10", Equipped with Tandem Conoroll
133 500$ CAD / 96 985$ USD
Kello-Bilt 225DOW - 38' Tandem Disc (Ask about other models Kello-Bilt available) *Pre-Selling This model features a four section design for maximum flexibility and weight distribution, with folding wings with narrow width for ease of transportation. Take care of crop residue, and hard dry soil with ease. Features of Kello-Bilt Tandem Disc: Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricated as a single piece of steel for maximum stability. There are no U-Bolts to become stretched and loosened that can cause disc assemblies or bearing failure. Heavy Duty Construction: Assembly is done with Gra
196 000$ CAD / 142 390$ USD
26' Kinze Model 261 Mach Till High Speed Disc Mach Til is a versatile, heavy built, low maintenance disc that prepares seed beds in the spring or incorporates residue in the fall. It operates at high speeds without creating compaction layers and produces an appealing finish. Standard Features: Mechanical Depth Control Independent Disc Arm Tungsten Carbide Scrapers Smooth Discs Articulating Hitch Easy Hydraulic Hookup Heavy Built Frame Hydraulic Jack Weight Distribution Large Floatation Tires Double V Discs SPECS 26' Width 13'-10" Transport Wide at tires 23,480 Lbs 5,500 Lb hitch weight 62 Discs @ 5" Spacing 22" Blades Rubber Packers with Maxlite Scrapers Right & Left Hand Gauge Wheels Deliveries are available, ask your salesperson for details.Prices are subject to applicable taxes.
Contactez le concessionnaire pour le prix
NOUVEAU
New Optimer L High-Speed Compact Disc, 225 HP, 24' 7" Working Width, 360 PTO.
99 000$ CAD / 71 922$ USD
Kello Bilt 225TSW-23' Tandem Disc *Pre-Selling Looking for a versatile disc harrow to handle light to medium soil tilling? Look no further than the Kello-Bilt Tandem Disc available from Flaman Agriculture. This heavy-duty disc harrow is designed for the efficient cultivation of light and medium soil with crop residue. The three-section folding wing design allows for narrow transport on roads, along with even weight distribution while tilling your fields. Take care of crop residue and hard, dry soil with ease. Features of Kello-Bilt Tandem Disc Oil Bath Bearing: Back-to-back tapered roller bearings are used to reduce side sheer while operating a disc harrow. Sealed with Duo-Cone TM seals, the bearings are bathed in a 90W gear oil for friction-free life. Welded Spacer Spool: Fabricated steel spacer spools, which won’t shatter or compress, and provide maximum durability in the toughest conditions. Gang Shafts & End Washers: Made of high carbon alloy steel to eliminate stretch and premature failure Disc Blades: Standard with 26” V notched blades to cultivate hard soil Bearing Standards & Wear Plates: Consisting of a minimum thickness of 3/8” rectangular tubing for maximum support. Gang Bar: Fabricat
Contactez le concessionnaire pour le prix
This Vertical Tillage unit is 25 ft wide and has 2 middle rows with notched blades, Cat 4 articulating hitch, hydraulic adjustable harrows and hydraulic adjustable single roller.
