34 500$ CAD / 25 260$ USD
This Elmer's bale processor Can handle 4 x 4 x 8 square bales and round bales.
Contactez le concessionnaire pour le prix
This unit has 8 discs and a cutting width of 10.5 ft, 540 rpm, recommended drawbar HP 60 HP and 2 double acting valves 6gpm.
Contactez le concessionnaire pour le prix
This Kuhn manure spreader has a struck level of 395 cubic feet and a max net load of 39,000 lbs with dual chain it's HP requirement is 160HP
Contactez le concessionnaire pour le prix
This unit is 660 cubic feet and has a max net load of 18,000 lbs, 2 screws, 5 knifes per screw, AR200 screw flighting, digi-star scale.
Contactez le concessionnaire pour le prix
CV PTO, 540 RPM, 19/45x17 tires, 36" folding conveyor with drop chute and magnet, rubber extension.
Contactez le concessionnaire pour le prix
hard faced cutting augers, CV PTO, 500/45R20 walking beam, art hitch, extended dogleg, hydr extender, front magnet
Contactez le concessionnaire pour le prix
We have Multiple units now in stock. With Ergonomic operator work station with tilt steering wheel, mid and rear PTO, twin HST pedals , R14 tires. Ranging 24.5 hp for the CS2520. Units each come with loader.
Contactez le concessionnaire pour le prix
This 25 Ft Salford Halo has Smooth blades on the front and notched on the back with a rolling basket. Single point depth control, constant flow hydraulic wing down pressure, fore and after hydraulic adjustments with neutral operation are just a few feature of this machine.
Contactez le concessionnaire pour le prix
Salford 2100 Series is a 36 feet wide Vertical Tillage tool with Cat 4 articulating hitch, full weight package, hydraulic adjustable tines and rolling basket.
Contactez le concessionnaire pour le prix
This Feed Wagon has an 8' conveyor, dual discharge, extra side display, 10" rubber extension, CV PTO, maximum payload 14,000 lbs. Struck level 635 cubic feet. Requires 100H.
Contactez le concessionnaire pour le prix
Working width 25'7", overall width in operating position 29', 6 rotors, PTO speed 540 RPM, and 7 tines per rotor Minimum PTO power requirements 35 HP
Contactez le concessionnaire pour le prix
This Bale Processor is an all-around processor ready to perform a variety of applications that will Distribute a consistent, uniform windrow of crop along the bunk line or out in the pasture. Or spread bedding with consistency and accuracy at ranges up to 50 ft (15.2 m).
Contactez le concessionnaire pour le prix
This includes the GFX-350 display kit and the NAV-500 antenna