Contactez le concessionnaire pour le prix
Regular Duty Stone Fork & Regular Utility Grapple Same great features as regular & heavy duty stone forks Opens up to 70" Comes with 2-½" x 8" cylinders
Contactez le concessionnaire pour le prix
Regular Duty Stone Fork with Retainer Style Tine & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Same great features as regular & heavy duty stone forks Comes with 2-1/2" x 8" cylinders
Contactez le concessionnaire pour le prix
Stone Fork (Retainer Style Tine) REGULAR DUTY REGULAR DUTY 1-¼" shaft diameter 2-½" spacing between tines Points are 5/8" thick, 400 Brinell high strength steel 23" high 40" deep 5500 lbs capacity
Contactez le concessionnaire pour le prix
Stone Fork (Cranked Kverneland Tine) 39" Conus II cranked Kverneland tines (32" useable length) Tines installed on 4" centres Ruggedly built Heavy duty back guard with 3 lb expanded metal grating 25.5" overall height
Contactez le concessionnaire pour le prix
Single Prong Bale Spear Kverneland tine Easy stabbing & removal 2000 lbs capacity @ 24" L.C. Available with 39" or 49" tine Two stabilizer tines Approximate weight: 165 lbs Frame width 50”
Contactez le concessionnaire pour le prix
Reese receiver/ball hitch (Ball hitch not included) Fits both CAT I & II Kverneland tine 2 stabilizer tines 2000 lbs capacity @ 24” L.C. Available with 39” or 49” tine Approximate weight: 87 lbs
Contactez le concessionnaire pour le prix
Debris Grapple Fork Two independent grapples Replaceable tempered tines eliminate the need for a support bar at points which reduces lodging and jamming when emptying bucket Designed to pick-up brush and other debris while leaving the dirt 39" Conus II cranked Kverneland tines (32" usable length) Cylinders completely protected from debris Comes with 2-½" x 8" cylinders 6" tine centres
Contactez le concessionnaire pour le prix
High Volume Skidsteer Snow Bucket 3/16" material, ¼" end plates ¾ X 4 bevelled cutting edge Reinforced top lip 39" deep, 31" high Screened back for better visibility Reinforced round back and end plates for strength, easy filling, & clean out Flat top acts as level indicator Tapered end plates are self-cleaning and reduces material build-up. NOTE: Add 2" to Inside Width column to calculate outside width of bucket
Contactez le concessionnaire pour le prix
Produce Skidsteer Bucket No sharp edges for gentle handling of produce Screened back for better visibility 31" deep, 31" high Made of the same material as standard bucket NOTE: Add 1-¼" to Inside Width column to calculate outside width of bucket
Contactez le concessionnaire pour le prix
Low Profile Skidsteer Bucket & Skidsteer Grapple Designed for use on skidsteers with limited clearance for grapple arms Comes with 2-1/2" x 8" cylinders
Contactez le concessionnaire pour le prix
Low Profile Skidsteer Bucket c/w Digging Teeth - REGULAR DUTY Regular duty 3/16" material, ¼" end plates ¾ X 4 bevelled cutting edge Reinforced top lip 32" deep, 19" high Lower back and longer base enables operator to see cutting edge of bucket Tapered end plates are self-cleaning and reduces material build-up NOTE: Add 2" to Inside Width column to calculate Outside Width of bucket
Contactez le concessionnaire pour le prix
Low Profile Skidsteer Bucket c/w Digging Teeth - Heavy Duty Heavy duty ¼" material, ¼" end plates ¾ X 6 bevelled cutting edge Reinforced top lip 34" deep, 19" high Lower back and longer base enables operator to see cutting edge of bucket Tapered end plates are self-cleaning and reduces material build-up Add 2" to Inside Width column to calculate outside Width of bucket
