32 500$ CAD / 23 804$ USD
2020 Ventrac 4500P. Unit has 31hp EFI Liquid Cooled Gas Engine. Equipped w/ Standard Seat w/ Arm Rests, Front Fenders, Front Aux Hydrulics, Weight Transfer System, Folding Rops and Cup Holder. Multiple Different Attachments are avaialable for this Unit but Not Included.
11 500$ CAD / 8 423$ USD
2011 Ventrac 4100. All Wheel Drive 31hp, Vanguard Gas Engine, Front Fenders, Weight Transfer System, Rear Weights, Articulated Power Steering, Hydrostatic Drive and Cup Holder. Unit Service and Ready to go to work for You. Multiple Different Attachments are avaialable for this Unit but Not Included.
18 000$ CAD / 13 184$ USD
2017 Ventrac 4500K Gas Tractor. 31hp Air Cooled Gas Vanguard Engine. Articulating 4wd Unit w/ Fornt Fenders, Front AUx Hydraulics, Roll Bar, Rear Weight Kit and Cup holder. Multiple Different Attachments are avaialable for this Unit but Not Included.
Contactez le concessionnaire pour le prix
RV602 Vacuum Collection System The Ventrac RV602 VACUUM COLLECTION SYSTEM* is for grass and leaf collection, and it consists of three primary components: 1- The Bin Assembly - mounts to the rear of 4000 series tractors. 2- The Suction/Blower System - powered by a 10HP Vanguard engine with electric start for efficient pickup and superior performance 3- High Lift Mechanism - hydraulically raise the collection bin up to five feet and dump to unload the contents into a garbage bin or trailer. The vac requires a docking station when dismounted. A storage stand with caster wheels is used when it is to be parked or moved around on a level floor. When loaded onto truck, a rigid base assembly is anchored to the floor that holds the vac firmly for transport. Other Features include: All steel construction Hydraulic lift and dump Electric start engine Collection boot is quickly and easily attached to the mower deck Handle on hose and hose end for ease of vacuuming flower beds, etc. Hose clamp for attaching hose to collection boot is an over-center clamp for ease of connecting Storage stands, complete with caster wheels, for ease of attaching or storage *For optimal performance, use with a 60" deck.
Contactez le concessionnaire pour le prix
The 49-inch Ventrac KR Landscape Rake performs a variety of landscaping tasks. From soil preparation, leveling ground, to removing rocks and debris, the KR502 works with ease and efficiency. The curved tines on the Landscape Rake can be used in either direction. Unlike pull-behind units,the Ventrac Landscape Rake is front mounted, allowing the operator to keep material from being driven over. This minimizes compaction as well as making the Landscape Rake very easy to use. The Landscape Rake can also be mounted to the rear 3-Point Hitch with the Ventrac 3-N-1 Adapter for pulling material. Front gauge wheels are adjustable front-to-back. If a wider surface area is needed, optional 10 -inch extensions are available, giving the operator an additional 20 inches of surface area.
Contactez le concessionnaire pour le prix
Ventrac KD Power Angle Blades have working widths of 48, 60, and 72 inches (122, 152, 183 centimeters). All control functions are performed with the S.D.L.A. control for raising and lowering the blade or angling it left or right. Adjustable skid shoes accommodate dozing at selected heights, such as moving snow on gravel driveways. The blades can be operated in a trip position for plowing or in a locked position for digging into material. Ventrac Power Angle Blades are versatile, labor-saving attachments designed for any number of jobs. From grading, leveling, and backfilling ground to plowing snow, moving material, or cleaning an area, the Ventrac KD series blades are up to the task.
Contactez le concessionnaire pour le prix
The revolutionary KA160 Power Blower features a vertical shaft design that delivers a powerful, yet quiet performance. The blower can be used to remove leaves, light snow, water, etc. The blower housing can be rotated 180 degrees with the standard hydraulic motor. This allows the operator to move debris in the desired direction without hindering operation. Two gauge wheels maintain a consistent distance from the surface.
Contactez le concessionnaire pour le prix
The KJ520 Narrow Broom is designed for sweeping and removal of material such as snow, leaves, dirt, light gravel, and even thatch. It is designed to fit narrow walkways, operational on a 48in walk. The KJ520 Broom can be hydraulically angled left or right and lifted up or down all with the S.D.L.A. Controls. An optional electric actuator allows the operator to adjust the speed and direction of the broom rotation, maximizing effectiveness and allowing the operator to reverse broom rotation, all from the seat of the tractor.
Contactez le concessionnaire pour le prix
Ventrac Snow Blowers are built for commercial snow clearing operations of sidewalks, driveways, and other areas. Available in width options of 48" and 52", these two stage snow blowers feature a 16" diameter solid auger for best snow transfer, a large 20" diameter fan, and the ability to launch snow at distances up to 40 feet. Standard features include adjustable cast iron skid shoe discs at the rear, high carbon hardened steel shoes at the side, and a reversible high carbon hardened steel cutting edge. The hydraulically activated discharge chute can rotate 180 degrees, all from the convenience of the operator’s seat, using Ventrac's exclusive S.D.L.A. control system. Chute deflection is manually adjustable and an electric chute deflection controller is optional.
Contactez le concessionnaire pour le prix
The Ventrac ET202 makes quick work of any clean up job. The Turbine Style Blower is designed to blow large volumes of air, and is much quieter than a conventional leaf blower. The ET202 can be used to blow leaves, light snow, and remove debris from sidewalks, parking lots and other areas. The ET202 Turbine Style Blower's powerful front discharge nozzle can be hydraulically rotated 360 degrees from the comfort of the operator's seat. The front bumper protects the nozzle from damage. Power and control allow you to move through your clean up work simply, quietly, and efficiently. The Ventrac Mount System allows you to get attached quickly, and move on to the next job.
Contactez le concessionnaire pour le prix
The 55 inch Ventrac KV552 V-Blade Snow Plow maximizes efficiency with the ability to quickly change from V plow to Scoop to straight blade, all from the convenience of Ventrac's exclusive S.D.L.A. control system. With a 48" V width, the KV552 is ideal for walks and areas that larger blades are unable to plow. Standard features include hydraulically activated wing cylinders, mechanical trip, adjustable cast iron skid shoe discs, reversible high carbon hardened steel cutting edges, and a center shoe for gliding over rough terrain. Pivot points are fully greasable to ensure proper operation, even in the worst environments. The KV552 V-Blade fits Ventrac 3000 and 4000 series tractors, and requires the 12V switch and plug kit.
Contactez le concessionnaire pour le prix
Ventrac Power Buckets are a must for any Ventrac owner. The power buckets are great for transporting material such as soil, sand, gravel, mulch, debris, snow, and much more. Used for landscaping, excavation, back-filling, leveling, digging and grading, the Power Buckets are an indispensable attachment from construction sites to your own backyard, allowing you to say goodbye to your old wheelbarrow. Ventrac Power Buckets are hydraulically controlled from the driver's seat, allowing for smooth, effortless operation. The Power Bucket is designed to sit upright after detachment, with the lift arms in the proper position for direct reconnect when the bucket is used again. The Power Bucket attaches with the Ventrac Mount System, allowing for attachment changes in a snap.
