12 178$ CAD / 8 910$ USD
4640 Universal Display - AutoTrac Activation
1 613$ CAD / 1 180$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year -- New 60" Working Width
1 271$ CAD / 930$ USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
1 257$ CAD / 920$ USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
2 050$ CAD / 1 500$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
2 952$ CAD / 2 160$ USD
Land Plane - Base: 3911XF - 60 Inches Working Width - 65 Inches Overall Width - 35 Inches Overall Height - 48 Inches Overall Length - 16 Inches Height to Hitch Pins - 484 Pounds Operating - Tractor Engine Horsepower Requirements: 25 to 50 Horsepower - 1/4 Inch Side Panel Thickness with Formed Edges - 3/8 Inch Adjustable Skid Shoe Thickness - 0 Inch to Negative 2.5 Inches Adjustable Blade Depth via Skid Shoes - Standard Duty - Four Heat Treated 4 Position Shank Scarifiers - Scarifier Depth Ranges: 2 Inches, 0 Inch, Negative 2 Inches, Negative 4 Inches - 3/8 Inch X 6 Inches High, Carbon, Heat Treated, Reversible and Replaceable, Cutting Edge Blades Two Cutting Edges - Category 1, Three Point Hitch - iMatch / Quick Hitch Compatible
4 811$ CAD / 3 520$ USD
Rotary Cutter - Base: 2721XF - Cutting Width: 72 Inches (1,830 mm) - Cutting Height: 1.5 to 9 Inches (38 to 229 mm) - Cutting Capacity (Diameter): 0 to 1 Inch (0 to 25 mm) - Cutting Chamber Depth: 7.5 Inches (190 mm) - Tractor PTO Horsepower Range: 25 to 65 Horsepower - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Driveline with Slip Clutch - Hitch: Lift Type Category I, Adaptable to II, iMatch, and AutoHitch Compatible - Overall Width: 75 Inches (1,905 mm) - Overall Length: 111.5 Inches (2,832.1 mm) - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge (3 mm) - Skirt Thickness: 11 Gauge (3 mm) - Gear Case Horsepower Rating: 65 Horsepower - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch (13 mm) - Blade Width: 3 Inches (76 mm) - Blade Tip Speed: 14,955 fpm (76 m/s) - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 28.5 Inches (723.9 mm) - Laminated Tire
4 032$ CAD / 2 950$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
1 613$ CAD / 1 180$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
1 613$ CAD / 1 180$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
1 613$ CAD / 1 180$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
1 613$ CAD / 1 180$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
