2 391$ CAD / 1 750$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield. -- NewType: 5 Ft, Mounted (Integral)
3 198$ CAD / 2 340$ USD
Rear Snowblower - Base: 3801XF - Working Width: 48 Inches - Transport Width: 48.5 Inches - Working Height: 24 5/8 Inches - Length: 38.5 Inches - Single Auger - Auger Diameter: 15 Inches - Auger Flighting Thickness: 1/4 Inches - Impeller Diameter: 20 Inches - Impeller Width: 6 Inches - Impeller Shaft Diameter: 1 Inch - Number of Impeller Blades: 4 - Roller Chain: 50 - Drive Sprocket: 17 Teeth - Driven Sprocket: 36 Teeth - Chain Idler: Manual Adjustment - Gear Box Manufacturer: Comer - Gear Box Description: Model L 25J - Gear Box Horsepower (Through Gears): 11 - Gear Box Horsepower (Straight Through): 30 - Tractor RPM: 540 RPM - Impeller RPM: 540 RPM - Auger RPM: 170 RPM - PTO Manufacturer: Comer - PTO Description: 20 - PTO Clutch Setting (Number): 900 - Shearbolt Bolt Size and Grade (PTO): M6 8.8 Metric - Shearbolt Bolt Size and Grade (Auger): 1/4 Inch 5 SAE - Skid Shoe: Adjustable - Skid Shoe Material: Steel - End Plate Thickness: 3/16 Inch - Back Plate Thickness: 12 Gauge - Impeller Housing Thickness: 12 Gauge - Impeller Blade Thickness: 3/16 Inch - Side Panel Bottom Thickness: 3/16 Inch - Cutting Edge: Welded - Cutting Edge Dimension: 3/8 Inch x 2 Inch - Chute Diameter: 8 Inches - Chute Base: Standard - Chute Rotation: 215 Degrees - Parking Stand - Hitch Category: Category I - iMatch Quick Hitch Compatible - Horsepower Requirements: 16 Minimum / 35 Maximum - Operating Weight: 375 Pounds - Manual Chute Deflector Adjustment - Manual Chute Rotation with Worm Gear with Crank -
1 612$ CAD / 1 180$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year -- New60" Working Width
1 271$ CAD / 930$ USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
1 257$ CAD / 920$ USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
1 257$ CAD / 920$ USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
1 257$ CAD / 920$ USD
Landscape Rake - Base: 1191XF - Tine Dimensions: 5/16 Inch x 1 Inch x 12 Inches Spring Steel - Tine Spacing: 30 at 1 Inch - Working Width: 60 Inches - Tractor Horsepower (Maximum): 25 - Parking Stand: Standard - Raking Positions: 5 Forward (0, 15, 30 Degrees), 5 Reverse (0, 15 Degrees) - 3-Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Pivot: 360 Degrees - Operating Weight: 168 Pounds - Warranty: 1 Year
2 842$ CAD / 2 080$ USD
Front Blade - Base: 2401XF - 60 Inch Cutting Width - 21 Inch Moldboard Height - 12 Gauge Moldboard Thickness - 26.5 Inch Overall Depth - 1/4 Inch x 6 Inch Reversible Cutting Edge - 5 Angle Adjustments up to 30 Degrees - Fits John Deere H120 and 220R Loaders - Compatible with John Deere 1000 Series and 2000 Series Tractors - 25 Maximum Tractor Horsepower Recommendation
3 539$ CAD / 2 590$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
4 100$ CAD / 3 000$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
4 031$ CAD / 2 950$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield.
1 435$ CAD / 1 050$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year
