1 693$ CAD / 1 230$ USD
Rear Blade - 84 Inch Working Width - Standard Duty - 3 Point Hitch: Category I - Tractor Horsepower Recommendation: 27 to 55 - Three Position Tilt - 12 Inch Offset, Left or Right - Moldboard Thickness: 1/4 Inch - Moldboard Length: 84 Inch - Moldboard Height: 14 Inch - Cutting Edge: 1/2 Inch x 6 Inch Reversible - Approximate Operating Weight: 305 Pounds - Angle: 360 Degrees - Reverse Angle: 0 and 15 Degrees Each Side - Forward: Angle: 0, 15, and 30 Degrees Each Side
10 434$ CAD / 7 580$ USD
Trencher - Base: 1561XF - Hitch: 3 Point Category I and iMatch - Working Depth at 65 Degree Digging Angle: 36 Inches (914.4 mm) - Chain Width: 6 Inches (152.4 mm) - Working Weight: 650 Pounds (294.8 kg) - Tractor PTO Horsepower Range: 15 to 30 - Recommended Trenching Angle: 65 Degrees - Headshaft Height: 8.5 Inches (215.9 mm) - Shipping Weight: 730 Pounds (331.1 kg) - Overall Length: 79 Inches (2,006.6 mm) - Overall Width: 38 Inches (965.2 mm) - Overall Height: 29 Inches (736.6 mm) - Discharge Auger: 14 Inches (355.6 mm) - Spoil Discharge Reach: 21 Inches (533.4 mm) - 540 RPM Rear PTO Drive - Slip Clutch Overload Protection - Parking Stand: Standard - Rear Hydraulics Required - Duty: Standard - 36 Inch Broom, Crummer and Chain
1 624$ CAD / 1 180$ USD
Box Blade - Base: 1741XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 48 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 360 Pounds - Warranty: 1 Year
1 569$ CAD / 1 140$ USD
Rear Blade - 72 Inch Working Width - Standard Duty - 3 Point Hitch: Category I - Tractor Horsepower Recommendation: 23 to 55 - Three Position Tilt - 12 Inch Offset, Left or Right - Moldboard Thickness: 1/4 Inch - Moldboard Length: 72 Inch - Moldboard Height: 14 Inch - Cutting Edge: 1/2 Inch x 6 Inch Reversible - Approximate Operating Weight: 305 Pounds - Angle: 360 Degrees - Reverse Angle: 0 and 15 Degrees Each Side - Forward: Angle: 0, 15, and 30 Degrees Each Side
3 682$ CAD / 2 680$ USD
Post Hole Digger – Base: 1228XF – Boom Outside Diameter: 3 1/2 Inch Reinforced - Yoke Outside Diameter: 2 7/8 Inch Reinforced - Auger Speed: 135 RPM - Gearbox Gear Ratio: 4:1 - Gearbox Horsepower Rating: 90 - PTO Horsepower Range: 40 to 90 - 3 Point Hitch Category: Category I or II - Works with Auger Model Numbers: PHA106, PHA109, PHA112, PHA118, PHA124, PHA132 - Weight: 260 Pounds - Includes: 9 Inch Diameter X 48 Inch Long Auger
922$ CAD / 670$ USD
Rear Blade - Base: 1291XF - Cutting Edge: 1/2 Inches x 6 Inches Reversible - Angle Pivot: 360 Degrees - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0, 15 and 30 Degrees Each Side- Moldboard Thickness: 7 Gauge - Moldboard Length: 60 Inches - Moldboard Height: 11 Inches - Tractor Horsepower (Maximum): 25 - 3 Point Hitch: Limited Category I (Aftermarket Category 0 Lift Pins Available) - Parking Stand Standard - Operating Weight: 155 Pounds - Warranty: 1 Year
1 473$ CAD / 1 070$ USD
Rear Blade - Base: 1281XF - Working Width: 60 Inches - Category I, 3 Point Hitch Mount - Operational Weight: 249 Pounds - Tractor Horsepower Recommendation: 19 to 45 - Tilt Positions: Three - Offset: 12 Inches Left or Right - Pivot: 360 Degrees - Parking Stand: Standard - Moldboard Height: 14 Inches - Moldboard Length: 60 Inches - Moldboard Thickness: 3/16 Inch - Duty: Standard Duty - Cutting Edge: 1/2 Inch x 6 Inches / Reversible - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0 and 15 Degrees Each Side
1 528$ CAD / 1 110$ USD
Box Blade - Base: 1051XF - 48 Inch Limited Category I, Standard Duty Box Blade - Capacity: 6.6 Cubic Foot - Tractor Horsepower (Maximum): 25 - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Scarifier Shanks: 3 Position with Holes - Scarifier Shank Points: 3 Replaceable, Hardened Points - Beam Size: 4 Inches x 4 Inches x 1/4 Inch - Beam Reinforcement: 3/8 Inch x 1 Inch Bar Inside Tube - End Plate Thickness: 3/16 Inch - Working Width: 48 Inches - Height: 14 Inches - Depth: 17 Inches - Tailgate: Fixed - 3 Point Hitch: Limited Category I - Aftermarket Category 0 Lift Pins Available - Mast Design: Bolt up with 1/4 Inch Plates - Moldboard Thickness: 7 Gauge - Approximate Operating Weight: 275 Pounds
3 682$ CAD / 2 680$ USD
Post Hole Digger – Base: 1228XF – Boom Outside Diameter: 3 1/2 Inch Reinforced - Yoke Outside Diameter: 2 7/8 Inch Reinforced - Auger Speed: 135 RPM - Gearbox Gear Ratio: 4:1 - Gearbox Horsepower Rating: 90 - PTO Horsepower Range: 40 to 90 - 3 Point Hitch Category: Category I or II - Works with Auger Model Numbers: PHA106, PHA109, PHA112, PHA118, PHA124, PHA132 - Weight: 260 Pounds - Includes: 9 Inch Diameter X 48 Inch Long Auger
2 849$ CAD / 2 070$ USD
Post Hole Digger - Base: 1226XF - Boom Outside Diameter: 3 1/2 Inches - Yoke Outside Diameter: 2 7/8 Inches - Auger Speed: 180 RPM - Gearbox Gear Ratio: 3:1 - Gearbox Maximum Horsepower Rating: 40 - PTO Horsepower Ranges: 18 through 40 - 3 Point Hitch Category: Category I - Works with Auger Model Numbers: PHA106, PHA109, PHA112 - Weight: 200 Pounds Includes: 12 Inch Diameter X 48 Inch Long Auger
1 473$ CAD / 1 070$ USD
Rear Blade - Base: 1281XF - Working Width: 60 Inches - Category I, 3 Point Hitch Mount - Operational Weight: 249 Pounds - Tractor Horsepower Recommendation: 19 to 45 - Tilt Positions: Three - Offset: 12 Inches Left or Right - Pivot: 360 Degrees - Parking Stand: Standard - Moldboard Height: 14 Inches - Moldboard Length: 60 Inches - Moldboard Thickness: 3/16 Inch - Duty: Standard Duty - Cutting Edge: 1/2 Inch x 6 Inches / Reversible - Angle / Forward: 0, 15 and 30 Degrees Each Side - Angle / Reverse: 0 and 15 Degrees Each Side
1 528$ CAD / 1 110$ USD
Box Blade - Base: 1051XF - 48 Inch Limited Category I, Standard Duty Box Blade - Capacity: 6.6 Cubic Foot - Tractor Horsepower (Maximum): 25 - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Scarifier Shanks: 3 Position with Holes - Scarifier Shank Points: 3 Replaceable, Hardened Points - Beam Size: 4 Inches x 4 Inches x 1/4 Inch - Beam Reinforcement: 3/8 Inch x 1 Inch Bar Inside Tube - End Plate Thickness: 3/16 Inch - Working Width: 48 Inches - Height: 14 Inches - Depth: 17 Inches - Tailgate: Fixed - 3 Point Hitch: Limited Category I - Aftermarket Category 0 Lift Pins Available - Mast Design: Bolt up with 1/4 Inch Plates - Moldboard Thickness: 7 Gauge - Approximate Operating Weight: 275 Pounds
