1 909$ CAD / 1 390$ USD
Pallet Fork - Base: 2153XF - (2) 1.38 Inches x 4.72 Inches Solid Tines - Fits John Deere 200, 300, 400 and 500 Series Loaders - Load Rating: 3,750 Pounds - 48 Inch Pallet Tines -- New
2 403$ CAD / 1 750$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield. -- NewType: 5 Ft, Mounted (Integral)
3 269$ CAD / 2 380$ USD
Front Blade - Base: 2091XF - Loader Mounted Front Blade - Manual Angle Adjustment - Cutting Width: 6 Feet - Loader Series: John Deere 300, 400, and 500 - Dimensions: Width 72 Inches x Height 23 Inches x Depth 34 Inches - Operational Weight: 400 Pounds -- New
1 003$ CAD / 730$ USD
Box Blade - Base: 1742XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 60 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 405 Pounds - Warranty: 1 Year -- New60" Working Width
1 222$ CAD / 890$ USD
Box Blade - Base: 1742XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 60 Inches - Tractor Horsepower: 18 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 5/16 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt On - Duty: Economy Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 405 Pounds - Warranty: 1 Year -- 60" Working Width
2 170$ CAD / 1 580$ USD
Box Blade - Base: 1042XF - 60 Inch Standard Duty Box Blade - 3 Point Hitch: Category I - iMatch Compatible: Yes - Working Width: 60 Inch - Tractor Horsepower Recommendations: 19 to 55 - Tailgate: Fixed - Shanks: (4) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Replaceable, Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Bolt up with 1/4 Inch Plates - Duty: Standard Duty - Cutting Edges: (2) 1/2 Inch x 6 Inches Reversible - Approximate Operating Weight: 425 Pounds - Warranty: 1 Year -- 60" Working Width
1 607$ CAD / 1 170$ USD
Bale Spear - Base: 2014XF - Primary Spears: Three at 49 Inches x 2 Inches (Approx. 44 Inches Usable Length) - Capacity: One Large Round Bale (2,500 Pounds) or One Large Square Bale (2,500 Pounds) - Dimensions: 20 Inches High x 46 Inches Wide x 54 Inches Long - Fits on Global Series Loaders - Operational weight: 173 Pounds -- New
1 689$ CAD / 1 230$ USD
Broadcast Spreader - Base: 3072XF - Hopper Material: Polyethylene - Hopper Weight Capacity: 678 Pounds - Hopper Volume Capacity: 10.6 Cubic Feet + Machine Weight: 125 Pounds - Swath Spread: 46 Feet - Hopper Width: 42 Inches - Hopper Height: 40 Inches - Tractor PTO Horsepower Range: 16 to 55 - PTO RPM: 540 RPM - PTO Shaft Category I (Heavy Duty Shielded 1 3/8 Inches) 3 Point Hitch: Category 1 - iMatch Hitch Compatible (1000)
2 884$ CAD / 2 100$ USD
Post Hole Digger – Base: 1228XF – Boom Outside Diameter: 3 1/2 Inch Reinforced - Yoke Outside Diameter: 2 7/8 Inch Reinforced - Auger Speed: 135 RPM - Gearbox Gear Ratio: 4:1 - Gearbox Horsepower Rating: 90 - PTO Horsepower Range: 40 to 90 - 3 Point Hitch Category: Category I or II - Works with Auger Model Numbers: PHA106, PHA109, PHA112, PHA118, PHA124, PHA132 - Weight: 260 Pounds - 12 Inch x 48 Inch Auger
3 214$ CAD / 2 340$ USD
Rear Snowblower - Base: 3801XF - Working Width: 48 Inches - Transport Width: 48.5 Inches - Working Height: 24 5/8 Inches - Length: 38.5 Inches - Single Auger - Auger Diameter: 15 Inches - Auger Flighting Thickness: 1/4 Inches - Impeller Diameter: 20 Inches - Impeller Width: 6 Inches - Impeller Shaft Diameter: 1 Inch - Number of Impeller Blades: 4 - Roller Chain: 50 - Drive Sprocket: 17 Teeth - Driven Sprocket: 36 Teeth - Chain Idler: Manual Adjustment - Gear Box Manufacturer: Comer - Gear Box Description: Model L 25J - Gear Box Horsepower (Through Gears): 11 - Gear Box Horsepower (Straight Through): 30 - Tractor RPM: 540 RPM - Impeller RPM: 540 RPM - Auger RPM: 170 RPM - PTO Manufacturer: Comer - PTO Description: 20 - PTO Clutch Setting (Number): 900 - Shearbolt Bolt Size and Grade (PTO): M6 8.8 Metric - Shearbolt Bolt Size and Grade (Auger): 1/4 Inch 5 SAE - Skid Shoe: Adjustable - Skid Shoe Material: Steel - End Plate Thickness: 3/16 Inch - Back Plate Thickness: 12 Gauge - Impeller Housing Thickness: 12 Gauge - Impeller Blade Thickness: 3/16 Inch - Side Panel Bottom Thickness: 3/16 Inch - Cutting Edge: Welded - Cutting Edge Dimension: 3/8 Inch x 2 Inch - Chute Diameter: 8 Inches - Chute Base: Standard - Chute Rotation: 215 Degrees - Parking Stand - Hitch Category: Category I - iMatch Quick Hitch Compatible - Horsepower Requirements: 16 Minimum / 35 Maximum - Operating Weight: 375 Pounds - Manual Chute Deflector Adjustment - Manual Chute Rotation with Worm Gear with Crank -
4 120$ CAD / 3 000$ USD
Hydraulic Grapple -- Hydraulic Grapple
549$ CAD / 400$ USD
Field Cultivator - 50 Inch Width - 36 Inch Height - 6 Shank - Adjustable Tine Spacing
