1 892$ CAD / 1 390$ USD
Pallet Fork - Base: 2153XF - (2) 1.38 Inches x 4.72 Inches Solid Tines - Fits John Deere 200, 300, 400 and 500 Series Loaders - Load Rating: 3,750 Pounds - 48 Inch Pallet Tines -- New
2 383$ CAD / 1 750$ USD
Rotary Cutter - Model: RC2060 - Base: 0512XF - Cutting Width: 60 Inches - Cutting Height: 1.5 to 9 Inches - Cutting Capacity (Diameter): 0 to 1 Inch - Cutting Chamber Depth: 7.5 Inches - Tractor PTO Horsepower Range: 19 to 65 - Tractor PTO: 540 RPM - Implement PTO: ASABE Category III PTO - Hitch: Lift Type Category I, Adaptable to Category II, iMatch, and AutoHitch Compatible - Overall Width: 63 Inches - Overall Length: 101.2 Inches - Deck Shape: Flat open Round Back - Deck Type: Single - Deck Thickness: 11 Gauge - Skirt Thickness: 11 Gauge - Gear Case Horsepower Rating: 65 - Blade Type: Heat Treated, Suction Type Blades - Blade Thickness: 0.5 Inch - Blade Width: 3 Inches - Blade Tip Speed: 14,355 Feet per Minute - Blade Pan Type: Round Pan Type Blade Holder - Blade Pan Diameter: 22.3 Inches - Laminated Tire - Driveline with Slip Clutch (1000) - Front and Rear Chain Enclosure (2000) - John Deere iMatch Hitch is required if Cutter is going on a John Deere 4M or 4R tractor equipped with R3/R4 tires, to avoid possible interference between tractor tires and cutter front shield. -- NewType: 5 Ft, Mounted (Integral)
3 240$ CAD / 2 380$ USD
Front Blade - Base: 2091XF - Loader Mounted Front Blade - Manual Angle Adjustment - Cutting Width: 6 Feet - Loader Series: John Deere 300, 400, and 500 - Dimensions: Width 72 Inches x Height 23 Inches x Depth 34 Inches - Operational Weight: 400 Pounds -- New
1 593$ CAD / 1 170$ USD
Bale Spear - Base: 2014XF - Primary Spears: Three at 49 Inches x 2 Inches (Approx. 44 Inches Usable Length) - Capacity: One Large Round Bale (2,500 Pounds) or One Large Square Bale (2,500 Pounds) - Dimensions: 20 Inches High x 46 Inches Wide x 54 Inches Long - Fits on Global Series Loaders - Operational weight: 173 Pounds -- New
4 084$ CAD / 3 000$ USD
Hydraulic Grapple -- Hydraulic Grapple
2 832$ CAD / 2 080$ USD
Front Blade - Base: 2401XF - 60 Inch Cutting Width - 21 Inch Moldboard Height - 12 Gauge Moldboard Thickness - 26.5 Inch Overall Depth - 1/4 Inch x 6 Inch Reversible Cutting Edge - 5 Angle Adjustments up to 30 Degrees - Fits John Deere H120 and 220R Loaders - Compatible with John Deere 1000 Series and 2000 Series Tractors - 25 Maximum Tractor Horsepower Recommendation
1 116$ CAD / 820$ USD
Pallet Fork Grapple - Base: 8071XF - Attaches to AP12F and AP12G Pallet Fork - Requires 3rd Hydraulic Loader Function - Grapple Clamp Length: 39 Inches - Grapple Clamp Width: 9.5 Inches - Operational Weight: 110 Pounds - Warranty: 1 Year - Does Not Include Pallet Fork
6 699$ CAD / 4 920$ USD
Pull Type Snow Blower - Base: 3851XF - PTO Horsepower Power Requirements: 20 to 65 Horsepower - Tractor PTO RPM: 540 RPM - Shipping Weight: 660 Pounds - Operating Weight: 630 Pounds - Working Width: 73 3/4 Inches - Working Height: 25 1/2 Inches - Overall Width: 75 Inches - Overall height (without chute): 36 1/2 Inches - Overall height (with chute closed): 60 1/2 Inches - Overall Length: 40 1/4 Inches - Position Marker: Yes - Chain Idler: Yes, Manual Adjustment - Parking Stand: Yes - Number of Auger Shear Bolts: 1 - Number of Impeller Shear Bolts: 1 - Type of Hitch: 3 point Category I - Quick Hitch Compatibility: Yes, iMatch Compatible - Direction of Impeller Rotation: Counterclockwise - Impeller Diameter: 24 Inches - Impeller Width: 7 Inches - Number of Impeller Blades: 4 - Impeller Shaft Diameter: 1 3/8 Inches - Impeller RPM: 540 RPM - Impeller Blade Thickness: 3/16 Inches - Single Auger - Auger Diameter: 15 Inches - Auger Drive System: Chain No. 60 - Auger Flighting Thickness: 1 1/4 Inches - Auger RPM: 170 RPM - Housing Thickness: 14 Gauge - Side Panel Thickness: 14 Gauge - Impeller Housing Thickness: 12 Gauge - Two Part Chute - Position: Right - Rotation of chute: Manual - Rotation Angle: 245 Degrees - Hydraulic Flow Restrictor Rotation: Yes - Deflector Adjustment: Manual - Cutting Edge: Welded - Cutting Edge Material: Carbon Steel - Cutting Edge Dimension: 3/8 Inches x 2 Inches - Skid Shoe: Steel Shoe - Skid Shoe Material: Carbon Steel - Skid Shoe Adjustment: Adjustable
1 620$ CAD / 1 190$ USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year
1 620$ CAD / 1 190$ USD
Box Blade - Base: 1641XF - 3 Point Hitch: Limited Category I / iMatch Compatible - Working Width: 61.5 Inches - Tractor Horsepower: 56 Maximum PTO - Tailgate: Fixed - Shanks: (5) Replaceable - Shank Type: 3 Position with Holes and 1/2 Inch Pin - Scarifier Points: Hardened Steel - End Plate Thickness: 3/8 Inch - Moldboard Thickness: 3/16 Inch - Moldboard Type: Formed Back - Mast: Welded - Duty: Standard Duty - Cutting Edges: (2) 3/8 Inch x 6 Inches Reversible - Approximate Operating Weight: 418 Pounds - Warranty: 1 Year
6 181$ CAD / 4 540$ USD
Front Blade - Base: 2094XF - Clearing Width: 7 Feet - Loader Series: Global Carrier on 6000 Series Tractors - Dimensions: 84 Inches Wide x 32 Inches High x 48 Inches Deep - Operational Weight: 710 Pounds
3 921$ CAD / 2 880$ USD
Frontier - PHD400 - Post Hole Digger -- Post Hole Digger
